Fixed Wing General Illumination

These 7.5" (191 mm) or 10" (254 mm) LED Lights serve as multi-tasking lights and operate on 28 V dc power. Full-illumination can be used in conjunction with the antibacterial mode LEDs. Use ‘White Light Disinfection Mode’ when both continuous disinfection and safe illumination are needed and ‘Antibacterial Mode,’ which emits a higher dosage of antimicrobial wavelength for when full illumination is not required.

This 6.35" (161 mm) compact, low power area light offers a variety of applications. Various optical lenses are available to aim and shape light output. Powered with 22-32 V dc.

Constructed with one LED, an aluminum rear outer casing, and a polyetherimide housing for optimal LED performance. Operates on 24-28 V dc nominal.

Measuring 3.10" x 4.30" x 2.32" (79 mm x 109 mm x 59 mm), the dual-light weighs a maximum 0.17 lb. (0.08 kg). Housing includes one 0.19” x 0.03” (4.83 mm x 0.81 mm) male tab terminal block and one 0.25” x 0.03” (6.35 mm x 0.81 mm) male tab terminal block. The terminal blocks are mounted on the top of the housings and a single open tab is left for the shipside female Faston connection.

No mounting hardware required. Snap-in bezel application and works on 24-28 V dc nominal power. Bright/cleaning mode produces 100 LUM warm white light@ CCT 3300K. Dim/normal mode produces 15 LUM @ CCT 3300K.

Utilizes high-powered LED’s and clear silicone lens to focus the light within the compartment. Utilizing this new technology of clear silicone will not only help to focus the light within the cargo compartment, but also provide a safer environment with no need for metal cages and less worry for any head impacts to ground crews and mechanics. Depending on where the light is required within the cargo compartment, specific lenes or molds can be used to optimize the light output.

Flush-mounted, 6" (150 mm), 3 LED element cargo light is ruggedized for use in aircraft baggage and cargo areas and is designed to meet the lighting requirements of SAE APR 1283 for cargo compartment lighting.

3.2" (80 mm) cargo light is designed to provide a large area of illumination with minimal intrusion into the load area. With an overall thickness of less than 1.5" (38 mm) and a 3"x3" (76 mm x 76 mm) installation requirement, this light is perfect for any 28 V application.

The hall-effect sensor is activated by a magnet assembly attached to the closet door. Once the door is closed, or the magnet is within range of the hall-effect sensor, the light deactivates.

Single configuration with the ability to be mounted on right- or left-side opening doors. The connector exits the housing in the center rear of the assembly and has a pigtail length that allows for connecting in either direction. It is activated or deactivated via a hall-effect sensor that can be activated in either installation configuration.

Halogen and LED combination light provides a low-power safety light in case of power loss. The light is 5.0" Ø (137 mm) and operates on 28 V dc power.

The next generation in low profile lights. Thinner design that removes the need to cut into the mounting structure panel to install the light assembly. Integrated Printed Circuit Board (PCB) light engine increases light output and uniformity over standard LED galley lights. Can be surface mounted without panel cutout allowing for easier installation. For anti-bacterial capabilities, please see our Antibacterial Light.

Low profile LED options for undershelf lighting, passenger area lighting, and flight crew area lighting. Available in 5” (127 mm), 7.5” (191 mm) and 10” (254 mm) with optional 115 V ac or 28 V dc versions.

Serves a vital role in cabin comfort, safety, and functionality. Includes reading lights with optional NVG compatibility, attendant call switches, air gaspers, and ordinance signs.

The latest PSU concepts leverage cutting edge technology with low profile or recessed designs that allow for optimum head space and maximum storage, while minimizing the risk of head impact. A variety of recessed air gaspers, information signs, and flush-mounted light designs are available.

Low profile LED dome light measures 2.48" (63 mm) Ø round. Capacitive touch light offers a 115°-130° degree wide beam angle that eliminates glare. Operates on 9-36 V dc power and protrudes out from the mounting surface at a minimal 0.15" (3.9 mm).

Measuring 2.48" x 1.54" (63 mm x 39 mm), this tactile switch light operates on 9-36 V dc power and has a 115° wide viewing angle. A short press switches the light between dim, full bright, dim, and off. A long press switches the light to off. White light LED with optional NVG compatibility.

2.48" (63 mm) Ø round LED light offers a smaller footprint, capacitive touch, one-color LED for those with limited installation space or only simple lighting needs in the cabin or cockpit. Operates on 9-36 V dc power. With one light finger touch, you can control the beam direction and intensity. No mechanical switches to fail and no bulbs to burn out.

3.15" (80 mm) Ø reading light operates on 9-36 V dc in both red & white light options. Capacitive sensing-controlled light can be used in the cockpit or cabin. Features a swiveling enclosure to direct light where you need it simply and quickly. Available in black, silver, or white exterior housing.

Specialized 3.15" (80 mm) Ø reading light operates on 9-36 V dc. This capacitive sensing-controlled cockpit and cabin light is available in a RGBW configuration, which includes a green LED light that is compatible with night vision equipment.

1.39" (35 mm) Ø round spot lights function on 6, 24 and 28 V dc power, and have been used as seat proximity and general illumination lights.

The 2.6" x 1.0" x .57" (66 mm x 25 mm x 14 mm) LED stair tread light is low-profile, with an input voltage of 20-32.2 V dc, and a maximum power draw of 0.325 W.

The 1.45" x 0.85" x 0.50" (37 mm x 22 mm x 13 mm) LED stair tread light is available with a white or aviation red lens. Options include 6 V or 12 V dc but can be customized to meet your requirements.

24 V dc white light pulls a minimal 0.45 W maximum. Available with a white or gray housing, this light weighs 0.11 lb. (0.05 kg).

Measuring 8.63" x 1.25" (219 mm x 32 mm), this 28 V dc light weighs 0.15 lb. (0.07 kg) and pulls a nominal 2.4 W maximum.

Measuring 3.96" x 2.10" x 2.48" (101 mm x 53 mm x 63 mm), this 24 V dc light weighs 0.11 lb. (0.05 kg). The white LED light has an input power of 0.45 W maximum.